R34 club in Japan - March 2010

I wish I can be with the ER34 gang in Japan. Looks like so much fun!!!

The scene there is so darn happening! Although the R34 has been around since 1998, it's still super popular there. Makes sense that R34 parts are still very costly here. :(

For Sale: ER34 JIC Coilovers

Pic 1: ER34 JIC coilovers

Selling off a superb condition JIC coilovers (I think. It has Cusco colours tho) for Nissan Skyline R34 GTT.

E-mail me at eujin[at]hotmail[dot]com if keen. Thanks.

Pic 2: Eyelet bolts - FR


Pic 3: Height adjustment


Pic 4: Adjustable fork mounting bracket - RR

BNR32 Halfcut

Pic 1: BNR32 halfcut

Helping a mate of mine sell this. So yeah, it's not like I have a halfcut lying around at home. LOL :D

This is a BNR32 halfcut. Come with the whole front cut plus all seats (FR & RR), Blitz exhaust, prop shaft, complete rear axle, etc... (and lots more)

One of the plugs is flooded thus suspect a piston is dead. Block is ok thus a piston replacement is needed and it will be fine. A lot of goodies in the car as evident from the pics; Okada Project Coils, HKS Intercooler, Apexi air filter, Zeal coilovers, etc.....

No. Will NOT strip parts off it. Selling as a package.

Please email me (eujin[at]hotmail[dot]com) if there is any queries. Worldwide delivery can be arranged.

Pic 2: The RB26DETT. Nicely done up don't you think?


Pic 3: Nur colours and NISMO oil filler cap


Pic 4: Okada Project Coils


Pic 5: Apexi open pod air filter


Pic 6: HKS boost controller stepper motor


Pic 7: Zeal coilovers


Pic 8: HKS Intercooler piping visible here

Dear Motorsports Stagea Pickup

Pic 1: Dear Motorsports Stagea Pickup

Just dig this picture out of my archive. Thought wanna share it with you guys, for those that have not seen it before. A small tuning shop located at city of Fukuoka, Kyushu called Dear Motorsports have a taken a Nissan Stagea and converted it into a pickup. :O

The evolution begins with a replacing the front end with all the parts from a BNR34 (minus the engine) in. As you can see, there's major rework of the body to turn it into a pickup; work on the C & D pillar, the pickup deck, 2 lesser doors, etc...

Pic 2: Dear Motorsports Stagea Pickup

As for the power plant, it runs a RB25DET from the ECR33. I would think that it would look a bit cooler if it had the twin round taillights off the BNR34 instead of the Stagea items.

Anyway, hope you enjoy these pics. Blast from the past from the year 2007. :P

Pic 3: RB25DET

Bumper Hood

Pic 1: Removing the old bumper hood

When your car is OLD, the bumper hood (yes that is what it is called according to Nissan) tends to sort of start to harden, break down and disintegrate. When this happens, it affects the alignment of your hood against the fenders. Yes, I am that particular; I need 'em to be perfectly aligned. :)

Besides that, more importantly, old and hardened bumper hood provides little or no protection when you slam your hood down after tinkering with the engine bay. A fresh set of soft springy bumper hood will solve that.

Pic 2: The old bumper hood

I sourced new bumper hoods (Part No. 65829-AA000) and got mine replaced. It's a quick job but I reckon it's pretty important.

Have you checked yours? Do you need yours to be replaced? I've a couple if you need 'em. These are the same for all Skyline series. Shoot me an email at eujin[at]hotmail[dot]com if you require it. Will ship worldwide. :)

Pic 3: The new bumper hood!!


Pic 4: Comparing the old and new bumper hood


Pic 5: All done and looking smick!

Breaking R34 Front End - "Store Room Clearance Sale"

I have the below parts from the frontal of a R34. If you've a collision (touch wood!), these parts will certainly come in very useful. Well, besides that, these would be great to be kept as spares or to replace ageing items.

I am selling off the below parts as I need to make room in my already over crowded store room. Prices are nego and it's priced to sell. Just need 'em space back as there will be more stuffs to store later on.

Allrighty then, the list of parts are as below. Shoot me an email via eujin[at]hotmail[dot]com if you are interested in any of the below parts. :)

Condensor Assy (Part No. 92110-AA000)

Pic 1: Consensor Assy (Part No. 92110-AA000)

Fan & Motor Assy-Condenser (Part No. 92120-5L700) - ITEM SOLD -

Pic 2: Fan & Motor Assy-Condenser (92120-5L700)


Pic 3: Fan & Motor Assy-Condenser (92120-5L700)

Front Apron

Will sell this as a whole package consisting of the below:-
Support Assy-Radiator Core (Part No. 62500-AA000
Support Radiator Core, Upper (Part No. 62510-AA000)
Bolt (Part No. 01121-03181)
Support Radiator Core, Lower (Part No. 62530-AA000)
Support-Radiator Core, Side RH (Part No. 62520-AA000)
Support-Radiator Core, Side LH (Part No. 62521-AA000)
Seal-Head Lamp Hole, RH (Part No. 62568-AA010)
Seal-Head Lamp Hole, LH (Part No. 62569-AA010)
2X Clip (Part No. 01553-00401)
... and many more small misc items

Pic 4: Front Apron


Pic 5: Front Apron


Pic 6: Front Apron

Front Bumper Retainer - ITEM SOLD -
Will sell this as a package consisting of the below:-
Retainer - Front Bumper Upper (Part No. 62240-AA000)
Bracket - Front Bumper Stay, RH (Part No. 62216-AA010R)
Bracket - Front Bumper Stay, LH (Part No. 62217-AA010L)
Reinforce - Front Bumper Center, Inner (Part No. 62030-AA030)

Pic 7: Front Bumper Retainer


Pic 8: Bracket - Front Bumper Stay, LH (Part No. 62217-AA010L)


Pic 9: Front Bumper Retainer


Pic 10: Front Bumper Retainer

Retainer - Front Fascia - ITEM SOLD -
These attach to the Front Bumper Retainer (above). Will sell it as a pair consisting of:-
Retainer - Front Fascia RH (Part No. 62244-AA000)
Retainer - Front Fascia LH (Part No. 62245-AA000)

Pic 11: Retainer - Front Fascia


Pic 12: Retainer - Front Fascia LH (Part No. 62245-AA000)


Pic 13: Retainer - Front Fascia RH (Part No. 62244-AA000)

Front Fender Wings - ITEM SOLD -

These are the corner cuts off the R34 fenders. With these your conversion to R34 front (from R32/R33/RPS13/A31, etc...) would be much more "easier" and provides a more factory look as it would fit the R34 headlights perfectly.

Pic 14: R34 fender corner cuts

Rod-Hood Support (Part No. 65771-AA000) - ITEM SOLD -

Pic 15: Rod-Hood Support (Part No. 65771-AA000)

Stay Hood Lock & Horn
Am selling this as a set consisting of:-
Stay Hood Lock (Part No. 62550-AA030)
Horn Assy-Electric (Part No. 25610-AA000)

Pic 16: Stay Hood Lock


Pic 17: Stay Hood Lock


Pic 18: Stay Hood Lock

Tank Assy-Windshield Washer

Selling this together with the pumps for front and rear washer. Package consists of:-
Tank Assy-Windshield Washer (w/o Inlet-Washer Tank)
Pump Assy-FR Washer (Part No. 28920-60U10)
Pump Assy-RR Washer (Part No. 28920-AA000)

Pic 19: Tank Assy-Windshield Washer


Pic 20: Pump Assy-FR & RR Washer


Pic 21: Tank Assy-Windshield Washer

Front Bumper (F2022-AA54D) - ITEM SOLD -

Pic 22: Front bumper (F2022-AA54D)

Hood and Hood Insulator
Selling together OR separately the:-
Hood (Part No. F5100-AA0AM)
Insulator-Hood (Part No. 65840-AA000) ~ The headshield lining (in perfect condition)

Pic 23: Hood (Part No. F5100-AA0AM)

Air Spoiler Assy (Part No. K6030-AA104) - ITEM SOLD -

Pic 24: Air Spoiler Assy (Part No. K6030-AA104)

Bracket-Condensor Mounting (92114-AA000)

Pic 25: Bracket-Condensor Mounting (92114-AA000)

Bracket - Front Bumper - ITEM SOLD -
Bracket - Front Bumper, RH (Part No. 62222-AA000)
Bracket - Front Bumper, LH (Part No. 62223-AA000)

Pic 26: Bracket - Front Bumper

Bracket-Radiator Mounting
2X Bracket-Radiator Mounting, Upper (Part No. 21508-01U00)
2X Mounting Rubber-Radiator, Upper (Part No. 21506-1U000)

Pic 27: Bracket-Radiator Mounting

Recaro RS-G

Pic 1: Recaro RS-G

Ever since I started "playing around" with cars, I've always wanted a fixed back bucket seat. The closest I got was a pair of Recaro SR3 in my previous car, the Perdana V6. Those were very comfortable yet provides enough grip on hard cornering. Too bad, I removed it out from the car and had it sold off 3 years ago. I didn't want to put it into the ER34 then as my plans with the car was not that extreme; just wanna keep it lightly modded and close to stock; well at least that's what I told myself.

Hummph, looked at how it turned out now!

Pic 2: Rear of the Recaro RS-G

So anyway, one day a buddy of mine offered me something I find it hard to resist, a Recaro RS-G along with railings for the R34. It's just plug and play. Now ain't that mighty convenient? :P

Pic 3: Recaro railings for the R34

The Recaro RS-G is the replacement model for the ever popular Recaro SP-G. It's a current model and still is highly popular especially in Japan. I've seen many pictures of it installed onto the R35 GT-R and also the S2000.

Pic 4: Side view of the Recaro RS-G

The Recaro RS-G that I have is wrapped in cloth material. I wished mine were wrapped in alcantara but I guess cloth will do for now unless someone wanna sponsor a re-trim. :)

Here are some pictures of the seat. :)

PS. Time for a harness to compliment the Recaro RS-G? :P

Pic 5: Harness guide holes


Pic 6: Compatible with 5/6 point harness


Pic 7: I wished mine were wrapped in Alcantara